Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S

Bending Tester STD- FB2 - S

Price 500.0 USD ($)/ Unit

MOQ : 1 Unit

Bending Tester STD- FB2 - S Specification

  • Test Material
  • Flexible Printed Circuit Boards (FPCs), Polyimide Films
  • Specimen Size
  • Conforms to industry standards for flexible PCB materials
  • Temperature
  • Ambient, 10-40C
  • Test Range
  • 0-10 Nm (Newton-meter)
  • Number of Specimens
  • Single Specimen per Test
  • Humidity
  • Up to 85% RH
  • Type
  • Bending Tester
  • Material
  • Metal (Main Body), Electronics (Controller)
  • Power
  • 220V AC
  • Power Source
  • Electric
  • Dimension (L*W*H)
  • Approx. 550 x 400 x 1000 mm
  • Weight
  • Approx. 60 kg
  • Usage
  • Laboratory Testing of Bending Strength
  • Application
  • Flexible PCB, Circuit Boards, Materials Testing
  • Operation Mode
  • Manual and semi-automatic
  • Cycle Counter
  • Digital with preset limit
  • Fixture Support
  • Exchangeable for different specimen widths
  • Control System
  • Digital display and controlled with manual knob adjustments
  • Display
  • Digital force and displacement indicator
  • Test Mode
  • 3-point and 4-point bending (programmable)
  • Safety Features
  • Overload Protection, Emergency Stop
  • Recording Method
  • Digital Output with optional PC interface
  • Compliance Standard
  • IEC, IPC-FC-234, or as per customer specification
  • Drive System
  • Electric Motor-driven
  • Test Speed
  • Adjustable from 10 to 100 mm/min
 
 

About Bending Tester STD- FB2 - S

Compliance Standards

ASTM D790 (Plastics Flexural Properties)

ISO 178 (Flexural Strength of Rigid Plastics)

SAE J2748 (Automotive Composite Flexure)

IEC 62133-2 (Battery Module Bending)

EN 1170-5 (GRC Flexural Testing)

Technical Parameters

Parameter Specification
Force Range 0.1N - 2000N (0.5%)
Deflection Accuracy 1m @ 10mm span
Test Speed 0.1 - 500 mm/min
Support Spans 10-500mm (adjustable)
Bending Radius 0.5-100mm (0.01mm)
Angular Resolution 0.01

Key Features

3-point & 4-point bending configurations

Real-time curvature measurement system

Automatic neutral axis calculation

High-speed strain mapping (1000 fps)

Multi-stage bend/reverse bend cycles

Test Capabilities

Test Type Standard Parameters
Flexural Modulus ASTM D790 2% strain limit
Bending Fatigue ISO 12106 10 cycles @ 20Hz
Springback Analysis SAE J2748 180 bend + release


Versatile Test Modes for Comprehensive Analysis

Switch between programmable 3-point and 4-point bending test methods to accommodate a range of testing requirements. This flexibility supports detailed research and development activities, ensuring your materials meet industry-specific criteria for bending strength and reliability.


User-Friendly Operation and Digital Control

The STD-FB2-S features manual knob adjustments alongside a clear digital display for force and displacement readouts. The blend of manual and semi-automatic modes lets operators tailor tests to specific materials, making it accessible for both experienced technicians and new users.


Robust Construction and Safety Assurance

Built with a sturdy metal main body and equipped with advanced overload protection and emergency stop capabilities, the tester offers durable and safe operation. Compliance with prominent standards further underscores its reliability for demanding laboratory environments.

FAQ's of Bending Tester STD- FB2 - S:


Q: How do I operate the Bending Tester STD-FB2-S for a bending test?

A: The tester is operated by placing your specimen in the exchangeable fixture, selecting either 3-point or 4-point bending mode via the programmable controls, adjusting test speed (10-100 mm/min) using the manual knob, and initiating the test. Digital displays and cycle counter guide the process and show results in real-time.

Q: What types of specimens can be tested with this bending tester?

A: The STD-FB2-S is designed for single specimen tests and is suitable for flexible printed circuit boards (FPCs), polyimide films, and other circuit board materials that conform to industry standards for flexible PCB specimens.

Q: When should I use 3-point versus 4-point bending modes?

A: 3-point bending is typically used for general flexural strength measurement, while 4-point bending offers better assessment of material behavior under uniform load. Your choice depends on your test material and the compliance standard or specific customer requirements.

Q: Where is the STD-FB2-S best suited for use?

A: This bending tester is ideal for laboratory environments involved in materials testing for the electronics industry. Its robust design and compliance with IEC, IPC-FC-234, or custom standards make it perfect for exporters, manufacturers, and suppliers in quality control laboratories.

Q: What is the process for recording and exporting test results?

A: Data is captured digitally and displayed on the instrument's screen. The tester provides a digital output, and an optional PC interface allows for easy exporting and documentation of results for further analysis or reporting.

Q: How does the cycle counter and overload protection enhance testing?

A: The digital cycle counter allows you to preset test cycles for repeatability and endurance testing, while overload protection ensures both user safety and the longevity of the instrument by preventing excessive force during operation.

Q: What are the main benefits of using this bending tester?

A: Key benefits include programmable test configurations, reliable safety features, compliance with international standards, user-friendly operation, precise digital measurement outputs, and flexible specimen support, all contributing to accurate and efficient laboratory testing.

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in Textile And Apparel Testing Machine Category

Automatic Rapid Thermal Conductivity Tester

Automatic Rapid Thermal Conductivity Tester

Price 1000.0 USD ($) / Piece

Minimum Order Quantity : 1 Piece

Power : Other, 150 W

Number of Specimens : 1 at a time

Humidity : 85% RH noncondensing

Type : Other, Automatic Rapid Thermal Conductivity Tester

Water Vapour Permeability Tester ISO 15496 Standard

Water Vapour Permeability Tester ISO 15496 Standard

Price 500.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Power : Other, 220V / 50Hz

Number of Specimens : 8 Specimens

Humidity : 3575% RH

Type : Other, Water Vapour Permeability Tester

Fabric Water Absorption Tester

Fabric Water Absorption Tester

Price 300.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Power : Other, Manual Operation

Number of Specimens : 1 per cycle

Humidity : Ambient

Type : Other, Water Absorption Tester

Textile Fiber Blend Ratio and Composition Analysis Instrument for R&D and Standard Compliance

Textile Fiber Blend Ratio and Composition Analysis Instrument for R&D and Standard Compliance

Price 500.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Power : Other, 220V/50Hz

Number of Specimens : Up to 24 per cycle

Humidity : 20% 85% RH (operational)

Type : Other, Fiber Blend Ratio Analysis Instrument



Back to top