Talk to us
You can use the Block-on-Ring Test Machine for the following applications and test specimens:
Friction and wear performance testing of lubricating oils and greases
Wear resistance evaluation of coatings under dry or lubricated conditions
Tribological analysis of polymers, ceramics, and composite materials
Friction and wear testing under high-temperature and low-temperature environments
Simulation of industrial material contact conditions with line contact geometry
Standardized performance evaluation of engineering materials
Research and development testing for automotive components
Quality control testing in mechanical, aerospace, and lubricant development laboratories
The system is suitable for testing in accordance with the following international standards and methods:
(1) ASTM D2509 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease
(2) ASTM D2714 Standard Guide for Calibration and Operation of Ring-on-Block Wear Test Machines
(3) ASTM D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids
(4) ASTM D2981 Standard Test Method for Evaluation of Solid Lubricant Films under Oscillating Motion
(5) ASTM D3704 Standard Test Method for Wear Characteristics of Lubricating Grease under Oscillating Motion
(6) ASTM G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Ring-on-Block Geometry
(7) ASTM G137 Standard Test Method for Ranking Resistance of Polymeric Materials to Sliding Wear Using Ring-on-Block Geometry
(8) Proposed STM Wear Testing of Dry Film Solid Lubricants under Unidirectional Motion
| Item | Technical Parameters |
|---|---|
| Speed range | Standard: 603.600 RPM; Optional: 0.57.200 RPM |
| Linear speed | Automatically calculated from shaft speed; programmable RPM setpoints, ramp rates, cycles, and test sequences |
| Load range | Dual-zone pneumatic loading: Low load 10100 lbs; High load 501.300 lbs |
| Temperature range | Standard chamber: Ambient to 200 C; Optional pressure chamber: Ambient to 250 C; External chiller for sub-ambient testing |
| Friction force measurement | Electronic load cell, standard range 0250 lbs; optional low-load range 025 lbs |
| Motion modes | Unidirectional rotation or oscillating motion (5720) |
| Test control mode | Time-based, cycle-based, or limit-based automatic shutdown |
| Power supply | 220 VAC, single phase, 50/60 Hz |
| Compressed air | 80 psig, clean and dry |
| Benchtop dimensions | 1.829 610 762 mm |
| Machine weight | 163 kg |
| Shipping dimensions | 1.220 1.016 1.067 mm |
| Shipping weight | 246 kg |

Price:
Price 1200.0 USD ($) / Set
Minimum Order Quantity : 1 Set
Type : Other, Thermal Conductivity Tester
Usage : Thermal conductivity measurement of substrate materials
Dimension (L*W*H) : 650 mm x 550 mm x 1300 mm
Power Source : Electric
Price 500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, Pressure Transmission Flow Meter Test Instrument
Usage : Test and measurement of flow and pressure in medical devices in accordance with ISO 8536
Dimension (L*W*H) : 360mm x 240mm x 210mm
Power Source : AC 220V, 50Hz
Price 1500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, Digital, Computerized, Floor Mounted
Usage : Lab Testing Equipment, Industrial Quality Control
Dimension (L*W*H) : 1200 x 700 x 1650 mm
Power Source : Electric
Price 600.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, AATCC 35 Rain Tester
Usage : Rain Penetration Resistance Testing
Dimension (L*W*H) : 600 x 600 x 1200 mm
Power Source : Electric