Talk to us
Tapered twin-screw extruders are primarily used for direct forming of pipes, sheets, and profiles from materials such as rigid polyvinyl chloride (UPVC), while also serving as plastic modifiers and pelletizers for powder materials. With different molds, they can directly extrude sheets, pipes, and profiles for experimental purposes.
JB/T 11343-2013Martindale Abrasion and Pilling Tester
JB/T 5420-2014Fabric Abrasion Tester
JB/T 6492-2014Fabric Pilling Tester
JB/T 6491-2015Fabric Snagging Tester
T/GDPIA 21-2020Test Method for Abrasion and Pilling Resistance of Textiles (Martindale Method)
T/GDPIA 16-2020Test Method for Fabric Pilling Resistance
T/GDPIA 22-2020Test Method for Fabric Snagging Resistance
T/ZZB 1351-2019Specification for Fabric Abrasion and Pilling Tester
T/CPMIA 0201-2022Test Method for Abrasion Resistance of Textile Materials (Martindale Method)
Screw Structure and Motion:
Conical Design: The feed section features a larger diameter, while the homogenizing section has a smaller diameter, creating a forced thrust to prevent material overheating.
Counter-Rotation: Two screws mesh in opposite directions, conveying material axially through the screw gap while applying shear force. Ideal for processing plastics like PVC and polyolefins.
Plasticizing and Extrusion Process:
Heating and Cooling: Built-in cast aluminum heaters and cooling fans within the barrel, combined with gradient temperature control technology, precisely regulate the processing temperature range.
Vacuum Degassing: Ensures uniform plasticization and minimizes bubbles and impurities through a vacuum degassing system.
Energy Efficiency and Environmental Protection:
Variable Frequency Drive: Compatible with VFD motors for energy-saving operation.
Waste Heat Recovery: Selected upgraded models incorporate waste heat recovery systems to further enhance energy efficiency.
| Category | Specification |
|---|---|
| Impact Energy | 2/4 J (simply supported beam); 2.75/5.5 J (cantilever) |
| Sampling Rate | 10 s |
| Resolution | 16 bits |
| Load Measurement Accuracy | 1% |
| Impact Knife Angle | 30 |
| Pendulum Torque (Simply Supported Beam) | 2.1436 Nm, 1.0718 Nm, 0.5359 Nm |
| Pendulum Torque (Cantilever Beam) | 2.9474 Nm, 1.4737 Nm |
| Pendulum Pre-lift Angle | 150 |
| Simply Supported Beam |
|
| Impact Speed | 2.9 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 230 mm |
| Blade Angle | 30 |
| Blade Radius | 2 mm |
| Support Corner Radius | 1 mm |
| Support Front Angle | 5 |
| Support Rear Angle | 10 |
| Support Span | 40. 60. 70 mm |
| Sample Type and Size (L W T) | 380104 mm, 5064 mm, 1201510 mm |
| Cantilever Beam |
|
| Impact Speed | 3.5 m/s |
| Distance from Pendulum Shaft Center to Sample Center | 335 mm |
| Blade Angle | 75 |
| Blade Radius | 0.8 mm |
| Front Edge Angle | 5 |
| Blade Back Angle | 10 |
| Sample Type and Size (L W T) | 80104 mm63.5 12.7 12.7 mm63.5 12.7 6.4 mm63.5 12.7 3.2 mm |

Price:
Price 200.0 USD ($) / Set
Minimum Order Quantity : 1 Set
Type : Other, High Temperature PreTreatment Chamber
Number of Specimens : 3 Helmets at a time
Weight : Approx. 90 kg
Dimension (L*W*H) : 600 mm x 600 mm x 900 mm
Price 600.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, Arc Resistance Testing Machine
Number of Specimens : 1 at a time
Weight : About 40 kg
Dimension (L*W*H) : Approx. 700 x 600 x 550 mm
Price 3000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, HighSpeed Reciprocating Friction Wear Tester
Number of Specimens : 1 Specimen per test
Weight : Approx. 75 kg
Dimension (L*W*H) : Approx. 650 mm x 420 mm x 900 mm
Price 500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Type : Other, Water Vapour Permeability Tester
Number of Specimens : 8 Specimens
Weight : 25 kg (approx.)
Dimension (L*W*H) : 600 x 470 x 300 mm (approx.)