Talk to us
The Multi-Function Thermal Conductivity Measurement Platform is suitable for thermal property evaluation in research, quality control, and material development, including:
Polymers, composites, and building materials
Liquids and phase-change materials
Pastes, powders, and bulk solids
Soil and polymeric materials
Typical test samples include solid blocks and plates, liquid samples, powders, pastes, and soil specimens, depending on the selected sensor and test method.
The platform supports internationally recognized absolute measurement standards, including:
(1) ISO 22007-2: Plastics Determination of thermal conductivity and thermal diffusivity Transient plane heat source method
(2) ISO 22007-7: Plastics Determination of thermal conductivity and thermal diffusivity using transient plane heat source
(3) GB/T 32064: Transient plane heat source method for thermal conductivity and thermal diffusivity of building materials
(4) ASTM E3088: Determination of thermal conductivity and thermal diffusivity using the transient plane source method
(5) ASTM D7896: Transient hot-wire method for thermal conductivity, thermal diffusivity, and volumetric heat capacity of liquids
(6) ASTM D5334: Transient line-source probe method
(7) ASTM D5930: Determination of thermal conductivity of plastics by transient line-source technique
| Method | TPS | THW | MTPS | TLS |
|---|---|---|---|---|
| Applicable Materials | Solids, pastes, powders | Liquids, phase-change materials | Solids, pastes, powders | Soil, pastes, polymers |
| Measurement Module | 3D bulk, anisotropic, plate, thin film; general: specific heat | Bulk | 3D bulk, anisotropic, plate; 1D standard | Bulk |
| Thermal Conductivity (W/mK) | 0.01500 | 0.012 | 0.03500 | 0.18 |
| Thermal Diffusivity (mm/s) | 0.01300 | Up to 0.5 | 0.01300 | Not applicable |
| Volumetric Heat Capacity (MJ/mK) | Up to 5 | Up to 5 | Up to 5 | Not applicable |
| Thermal Effusivity (Ws/mK) | 2040000 | Not applicable | 2040000 | Not applicable |
| Sample Size (mm | mL) | 10 or square | 20 mL | 25 or square |
| Sample Thickness (mm) | 0.05 | Not applicable | 0.1 | Probe length 100 |
| Maximum Sample Size | Unlimited | Unlimited | Unlimited | Unlimited |
| Test Time (s) | 2160 | 1 | 2160 | 180 |
| Accuracy (Thermal Conductivity) | 5% | 2% | 5% | 5% |
| Repeatability (Thermal Conductivity) | 2% | 1% | 2% | 2% |
| Temperature Range (C) | 0300 / 75300 | 50200 | 0100 / 50200 | 40100 |
| Sample Configuration | Symmetric / asymmetric | Insert type | Asymmetric (single-sided) | Insert type |
| Supported Standards | ISO 22007-2. ISO 22007-7. GB/T 32064. ASTM E3088 | ASTM D7896 | ISO 22007-7 | ASTM D5334. ASTM D5930 |

Price:
Price 400.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Specimen Size : Various (customized grips available)
Max Height : 300 mm
Test Stroke : Max 200 mm
Application : Testing mechanical properties of springs
Price 600.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Specimen Size : 100 x 100 mm
Max Height : 900 mm
Test Stroke : 0200 mm
Application : Vertical load performance and deformation test for geomembrane materials.
Price 300.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Specimen Size : Up to 100 50 mm
Max Height : Approx. 200 mm
Test Stroke : 060 mm
Application : Surface hardness testing for coatings, paints, lacquer, plastic, etc. (ASTM D3363)
Price 500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Specimen Size : Customizable
Max Height : 180 mm
Test Stroke : 10150 mm
Application : Connector waterproof and air tightness testing