Talk to us
You can conduct tests in accordance with widely recognized international and regional standards, including:
(1) GB/T 3140 series Wear performance testing of lubricating oils and greases
(2) ASTM D2266 Anti-wear properties of lubricating grease (four-ball method)
(3) ASTM D2783 Extreme pressure properties of lubricating fluids
(4) ASTM D3702 Thrust washer wear testing
(5) ASTM D4172 Anti-wear properties of lubricating oils
(6) ASTM D5183 Determination of friction coefficient of lubricants
(7) ASTM G99 Pin-on-disk wear testing
(8) DIN 50324 Determination of friction and wear of solid materials
(9) DIN 51350 (Parts 16) Lubricant shear stability and wear testing
(10) ISO 11008 Extreme pressure properties of lubricating greases (four-ball method)
(11) IP 239 / IP 300 Lubricant extreme pressure and wear tests
(12) CEC L-45-T-93 Shear stability of transmission fluids
| Item | Standard Configuration | High-Speed Configuration | Upgraded Configuration |
|---|---|---|---|
| Speed Range | 303.000 rpm | 303.000 rpm / 10010.000 rpm | Same as high-speed |
| Maximum Spindle Load | 10.000 N @ 3.000 rpm | 10.000 N @ 3.000 rpm / 4.000 N @ 10.000 rpm | Same as high-speed |
| Maximum Spindle Speed | 6.000 rpm | 10.000 rpm | 10.000 rpm |
| Torque Capacity | 14 Nm @ 301.500 rpm | 14 Nm @ 301.500 rpm / 7 Nm @ 3.000 rpm / 2.1 Nm @ 10.000 rpm | 25 Nm @ 301.500 rpm / 13 Nm @ 3.000 rpm / 4 Nm @ 10.000 rpm |
| Motor Power | 2.2 kW, single-phase | 2.2 kW, single-phase | 4 kW, three-phase |
| Temperature Capability | Up to 600 C (with high-temperature fixture) | Up to 600 C (with high-temperature fixture) | Up to 600 C (with high-temperature fixture) |
| Load Range | 110.000 N (depending on actuator) | 110.000 N (depending on actuator) | 110.000 N (depending on actuator) |
| Control Parameters | Speed, load, temperature, test time | Speed, load, temperature, test time | Speed, load, temperature, test time |
| Recorded Parameters | Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count | Same as standard | Same as standard |
| Data Interface | USB / software | USB / software | USB / software |
| Air Supply | 4 cfm @ 8 bar | 4 cfm @ 8 bar | 4 cfm @ 8 bar |
| Dimensions | 900 600 2.000 mm | 900 600 2.000 mm | 900 600 2.000 mm |
| Weight | 350 kg | 350 kg | 350 kg |

Price:
Price 1200.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Usage : Determining fabric dimensional stability to steam (shrinkage / relax)
Power : Other, 800W
Number of Specimens : 1 per test cycle
Temperature : Steam at approx. 100C
Price 500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Usage : Testing Luer Conical Joint fittings as per ISO 803697 standard
Power : Other, 220V, 50Hz
Number of Specimens : 1 specimen per test
Temperature : 5C40C
Price 10000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Usage : Simulation of Hip Joint Wear and Fatigue
Power : Other, 220V, 50Hz
Number of Specimens : 6 stations (simultaneous testing)
Temperature : Ambient to 55C (adjustable)
Price 600.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Usage : For pretreatment of safety helmets before mechanical and physical testing
Power : Other, 2.5 kW
Number of Specimens : Up to 3 helmets per cycle
Temperature : Adjustable, 50C to 200C