Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester

Single Cable Vertical Flame Tester

Price 780.0 USD ($)/ Unit

MOQ : 1 Unit

Single Cable Vertical Flame Tester Specification

  • Test Range
  • Flame Height 45 mm, Adjustable Burner Angle
  • Specimen Size
  • 600 25 mm Length, 0.5 mm2 to 35 mm2 Cross Section
  • Number of Specimens
  • 1 Specimen Per Test
  • Temperature
  • 10C to 40C
  • Gas Pressure
  • Adjustable from 0 to 0.1 MPa
  • Humidity
  • 30% to 90% RH
  • Port Size
  • 8 mm Gas Inlet
  • Test Material
  • PVC, XLPE, Rubber & other cable insulation
  • Type
  • Single Cable Vertical Flame Tester
  • Material
  • Stainless Steel Chamber, Heat-resistant Glass Door
  • Power
  • AC 220V, 50/60Hz, 500W
  • Power Source
  • Electric
  • Dimension (L*W*H)
  • 1200 mm x 580 mm x 1500 mm
  • Weight
  • Approx. 140 kg
  • Usage
  • Burning Test of Single Cable or Wire
  • Application
  • Used for insulation material flame resistance test based on IEC 60332-1, IS 10810, BS 4066, etc.
  • Ignition Mode
  • Automatic & Manual
  • Observation Window
  • Heat-resistant Large Viewing Glass
  • Compliant Standards
  • IEC 60332-1, IS 10810 Part 53, BS 4066
  • Exhaust Fan
  • Built-in High Efficiency Exhaust Fan
  • Safety Interlock
  • Door Safety Protection Switch
  • Flame Height Adjustment
  • Available
  • Burner Type
  • Propane Burner Conforming to IEC Standards
  • Timer
  • Digital Timer (0-999.9s)
 
 

About Single Cable Vertical Flame Tester

Application

Fabric vertical combustion tester is mainly used to evaluate the combustion characteristics of plastics and other non-metallic materials in fire. It is suitable for lighting equipment, low-voltage electrical appliances, household appliances, machine tools,electrical tools, electronic instruments, electrical instruments, electrical connectors and accessories and other electrical and electronic products and components of the research,production and quality inspection departments, but also suitable for insulation materials,engineering plastics or other solid combustible materials industry. In addition, it can also be used by the plastics industry, inspection departments and scientific research institutions.

Parameter

Description Details
Combustion Angle 0-45
Power 50W, 500W, 1000W
Flame Application Time 0999.9S
Flame Height 201mm, 402mm, 5060mm
Temperature Measurement Distance 101mm, 551mm, 95mm (assuming the last value should have a unit, here added "mm" for consistency)


Premium Compliance and Precision

Our Single Cable Vertical Flame Tester is meticulously engineered to comply with IEC 60332-1, IS 10810 Part 53, and BS 4066 requirements. It delivers dependable results for both manufacturers and testing laboratories, aiding in consistent assessment of cable flame resistance. The adjustable digital timer and fully controlled environment ensure precise and repeatable outcomes every time.


Robust Design with User-Centric Safety

Crafted with a stainless steel chamber and equipped with a heat-resistant glass door, this tester not only guarantees durability but also ensures clear observation of test samples. Advanced safety interlock mechanisms and a built-in, high-efficiency exhaust fan protect operators during each test, making it a reliable choice for ongoing laboratory applications.

FAQ's of Single Cable Vertical Flame Tester:


Q: How is the Single Cable Vertical Flame Tester operated?

A: The tester can be operated using either automatic or manual ignition modes. Simply place the cable specimen inside the chamber, set the desired flame height and timer, and initiate the test following standard procedures outlined in IEC 60332-1 or equivalent standards.

Q: What standard cables and materials can be tested using this device?

A: This vertical flame tester is suitable for a wide range of cable insulation materials, including PVC, XLPE, rubber, and other common electrical insulation types. Specimen sizes can range from 0.5 mm2 to 35 mm2 cross-section with a length of 600 mm.

Q: When should this tester be used during cable production?

A: Manufacturers and quality control labs typically use the Single Cable Vertical Flame Tester during the product development stage and routine batch testing. It helps ensure that cable products meet international flame resistance requirements before distribution.

Q: Where is this tester commonly installed and used?

A: The tester is designed for laboratory environments and manufacturing quality control rooms. Its robust build makes it suitable for cable manufacturing plants, third-party testing facilities, and research institutions assessing electrical cable safety.

Q: What is the process for conducting a test with this equipment?

A: To perform a test, place the prepared specimen in the vertical orientation inside the chamber, adjust the flame height and burner angle as needed, set the timer, and ignite the burner. Results are observed through the heat-resistant window. The built-in exhaust fan ensures fumes are effectively managed throughout the process.

Q: What are the key benefits of using this cable flame tester?

A: With its compliance to leading international standards, precise control features, and integrated safety mechanisms, this tester enhances test accuracy and operator protection. Its versatility covers a broad range of insulation materials, supporting consistent quality assurance in cable manufacturing.

Tell us about your requirement
product

Price:

Quantity
Select Unit

  • 50
  • 100
  • 200
  • 250
  • 500
  • 1000+
Additional detail
Mobile number

Email

More Products in Flammabiliy Testing Machine Category

ISO 7240-9 Smoke Detector Response Test Tunnel

ISO 7240-9 Smoke Detector Response Test Tunnel

Price 4000.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Temperature : Ambient, 15C to 35C operating range

Dimension (L*W*H) : Approx. 3000 x 600 x 1100 mm

Gas Pressure : Low pressure for smoke dispersion (as per standard)

Power : Other, 220V AC, 1.5 kW (Typical)

Smoldering performance test furnace of thermal insulation material

Smoldering performance test furnace of thermal insulation material

Price 2500.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Temperature : Ambient to 600C

Dimension (L*W*H) : Approx. 700 x 500 x 1000 mm

Gas Pressure : 0100 kPa (adjustable)

Power : Other, 220V/50Hz, 2kW

Needle Flame Tester IEC 60695-11-5 Standard

Needle Flame Tester IEC 60695-11-5 Standard

Price 1000.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Temperature : Room temperature to 400C (adjustable)

Dimension (L*W*H) : 1100 mm 600 mm 1200 mm

Gas Pressure : 0.1 MPa (adjustable)

Power : Other, AC 220V 10%, 50/60Hz, 500W

ISO 9705 Wood Stack Room Corner Combustion Test System

ISO 9705 Wood Stack Room Corner Combustion Test System

Price 1200.0 USD ($) / Unit

Minimum Order Quantity : 1 Unit

Temperature : Test chamber ambient to 40C

Dimension (L*W*H) : Customizable, Standard ~1500mm x 700mm x 1800mm

Gas Pressure : 02 bar adjustable (for ignition gas supply)

Power : Other, 220V / 3KW



Back to top