Talk to us
It conforms to the United Nations Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 33.2.1.4 Test N.1: Test Method for Flammable Solids; conforms to GB/T 21618-2008 "Dangerous Goods - Test Method for Burning Rate of Flammable Solids"; conforms to NY/T 1860.15-2010 "Guidelines for Determination of Physicochemical Properties of Pesticides - Part 15: Flammability of Solids"; conforms to GB 5085.4 "Identification Standards for Hazardous Waste - Flammability Identification" 4.2 Flammable Solid Test; conforms to GAT536 "Classification and Test Methods for Fire Hazards of Flammable and Explosive Hazardous Goods"; and conforms to national standards and industry standards that are equivalent or equivalent to the above standards.
(1)It adopts an embedded processor and Windows CE operating system.
(2)With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
(3) It integrates two functions, "sieving experiment" and "combustion rate experiment", into one.
(4)It is applicable to the detection of two types of sample materials: non - metallic powder and metallic powder.
(5) It is equipped with a standard stacking mold and features a user - friendly shaking handle design.
(6)Strictly in accordance with standard requirements, an ignition torch is used for the sieving experiment, eliminating the need for a gas cylinder and ensuring safety.
(7) A nitrogen rod is used as the ignition source for the combustion rate experiment. The material has high stability, and the ignition source temperature detection device ensures that the ignition temperature reaches above 1000C.
(8) It uses full - automatic infrared flame detection technology, which can reliably detect open flames and smoldering phenomena, ensuring detection accuracy.
(9) It has a fault - detection function and audible and visual alarm functions to ensure the safety of the experiment.
(10) The experimental process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
|
Operating environment |
(540)C, <85%RH |
|
Ignition source temperature |
1000C |
|
Ignition method |
Gas igniter with nitrogen-silicon rod |
|
Combustion detection stroke |
(0250)mm |
|
Combustion distance measurement accuracy |
0.5mm |
|
Timing range |
5min (non-metallic); 20min (metallic) |
|
Timing display resolution |
0.1s |
|
Pile stack mold |
Triangular-shaped molds 260mm long, 20mm wide, profiled to an inner height of 10mm |
|
Burner plate |
Flat plate made of corundum mullite, impervious to penetration, non-combustible, and with low thermal conductivity |

Price:
Price 300.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Power Source : Electric
Temperature : Room Temperature, 1035 C operating
Material : Stainless Steel
Dimension (L*W*H) : 900 x 410 x 605 mm
Price 1500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Power Source : Electric
Temperature : Ambient to 50C (controlled)
Material : Stainless Steel Construction
Dimension (L*W*H) : 900mm x 600mm x 1200mm
Price 4000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Power Source : Electric
Temperature : Ambient; monitoring and control up to 60C
Material : Stainless Steel and Hightemperature resistant glass
Dimension (L*W*H) : 3800 mm x 3800 mm x 2500 mm (customizable based on test room)
Price 12000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Power Source : Electric
Temperature : 20C to +200C (controllable reactor temperature range)
Material : Stainless Steel, Glass (reactor body), Electronics (control panel)
Dimension (L*W*H) : 1200 mm x 700 mm x 1800 mm (main unit plus workstation)