Talk to us
(1)YY/T 0961
(2)ASTM F1798
These standards specify test methods for evaluating the uniaxial static and fatigue strength of spinal internal fixation systems, as well as the resistance to loosening of assembly connection devices. The purpose is to provide a mechanical performance evaluation method for spinal implant connection devices of different designs.
The Spinal Internal Fixation System Assembly Testing Machine is designed to evaluate the mechanical performance, stability, and assembly integrity of spinal implants. Typical applications include:
Orthopedic implant testing: Assess the strength, stiffness, and fixation stability of assembled pedicle screws, rods, plates, and cages.
Quality control: Ensure consistent performance and proper assembly of spinal fixation devices during manufacturing.
Research and development: Optimize implant design, materials, and connection mechanisms for improved biomechanical performance.
Standards compliance: Conduct tests in accordance with ISO 12189. ASTM F1717. and other relevant international guidelines to verify assembly reliability.
This machine ensures spinal fixation systems meet mechanical and structural requirements for safe clinical use.
| Parameter | Specification |
|---|---|
| Maximum Load Peak | 4400 N |
| Dynamic Load Peak | 3000 N |
| Static Load Peak | 2100 N |
| Testing Machine Accuracy Class | 0.5 |
| Load Measurement Range | 0.4% 100% F.S. |
| Load Measurement Accuracy | Better than 0.2% of indicated value (within the load measurement range) |
| Maximum Fatigue Loading Frequency | 100 Hz |
| Axial Stroke | 30 mm |
| Displacement Resolution | 0.1 m |
| Test Space (upper-lower fixture spacing) | 0 950 mm |
| Net Weight | Approx. 900 kg |
| Dimensions | Approx. 1000 700 1800 mm |
| Optional Environmental Accessories | Water bath environment, high-temperature environment, low-temperature environment, humidity control environment, etc. |
| Applicable Scenarios | Fatigue, fracture, and static testing of metals, polymers, composites, and other materials; Static and dynamic testing of surgical implants (e.g., trauma, joint, spinal, dental applications); Tensile fatigue testing of polymer materials; Crack propagation testing of rubber materials |
| Optional Fixtures | Mechanical tensile fixtures, compression fixtures, bending fixtures; Femoral stem-specific fixtures, four-point bending fixtures; Spinal rod/screw-specific fixtures, tibial plateau-specific fixtures; Vertebral resection model system compression/tension fixtures; Dental implant fixtures, and other specialized testing fixtures |

Price:
Price 13000.0 USD ($) / Piece
Minimum Order Quantity : 1 Piece
Measuring Range : Up to 30 mm displacement
Capacity : 3station test chambers
Humidity : 20 90% RH (operating)
Test Width : Customizable (standard 75 mm)
Price 2000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Measuring Range : 0 10 kN
Capacity : 10 kN
Humidity : 20% 80%
Test Width : Up to 40 mm
Price 600.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Measuring Range : Up to 100,000 cycles
Capacity : Up to 4 test heads
Humidity : 20%80% RH
Test Width : Up to 60 mm
Price 1500.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Measuring Range : 0.01 50 kN
Capacity : 50 kN maximum
Humidity : 2090% RH (noncondensing)
Test Width : 120 mm