Talk to us
You can use the Twist Compression Tester for the following applications and test materials:
(1) Friction and adhesive wear evaluation of metallic materials such as carbon steels, stainless steels, non-ferrous alloys, and structural alloys.
(2) Performance assessment of surface-engineered materials including hardened layers, coated surfaces, and treated contact pairs.
(3) Tribological testing of bearing materials, sealing materials, and mechanical contact components.
(4) Comparative studies of dry versus lubricated friction behavior.
(5) Adhesive wear mechanism investigation under high contact pressure.
(6) Material screening during component design and development.
(7) Research and teaching in tribology laboratories and academic institutions.
(8) Quality evaluation and consistency verification in industrial testing laboratories.
ASTM G223 Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test
| Parameter | Specification |
|---|---|
| Hollow Cylinder Specimen | 25 mm outer diameter, 3 mm wall thickness |
| Flat Specimen | 40 40 mm, 3 mm thickness (variable) |
| Load Range | 1.5 50 kN |
| Loading Method | Hydraulic |
| Load Measurement | Load cell |
| Load Control | Manual |
| Friction Measurement | Force transducer |
| Test Temperature | Ambient |
| Lubrication | Manual |
| Rotational Speed | 0 37.4 rpm |
| Motor Type | Three-phase AC gear motor |
| Motor Power | 2.6 kW |
| Maximum Output Torque | 630 Nm |
| Control and Data Acquisition | Touch-screen PLC |
| Data Export | USB storage |

Price:
Price 300.0 USD ($) / Piece
Minimum Order Quantity : 1 Piece
Dimension (L*W*H) : 450 mm x 360 mm x 240 mm
Temperature : 10C 40C
Usage : Leak Testing of Catheters
Weight : About 15 Kg
Price 2000.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Dimension (L*W*H) : 480mm x 440mm x 430mm
Temperature : 10C to 40C (Ambient)
Usage : Measuring thermal conductivity of geotechnical materials
Weight : ~35 kg
Price 1200.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Dimension (L*W*H) : Approx. 700mm 380mm 450mm
Temperature : Room temperature or as per standard (typically 20C 2C)
Usage : To test the resistance of protective clothing materials against chemical liquid penetration as per ISO 6530 standard.
Weight : About 45 kg
Price 1200.0 USD ($) / Unit
Minimum Order Quantity : 1 Unit
Dimension (L*W*H) : 400mm x 360mm x 280mm
Temperature : 15C 35C (operating)
Usage : Surface/Volume Resistivity Testing on Fabric
Weight : ~15 kg